Site Map
- Home page
- Contact Us
- Faculty
- Students
- Nathan Ames
- Morgan Gallagher
- Nathan Nissley
- Seth Norton
- Isaratat Phung-On
- Shu Shi
- Matt Gonser
- Jeffrey Sowards
- Publications
- Review Papers
- Recent advances in welding metallurgy
- Recent advances in the understanding of material weldability
- Recent Developments in Weldability Testing (Keynote)
- Ni-Base Superalloys
- Effect of Multiple Postweld Heat Treatment Cycles on the Weldability of Waspaloy
- "The Effect of Rejuvenation Heat Treatments on the Repair Weldability of Wrought Alloy 718"
- Liquation Phenomena in the Simulated HAZ of Alloy 718 after Multiple Postweld Heat Treatment Cycles
- The Effect of Annealing Twin-Generated Special Grain Boundaries on HAZ Liquation Cracking of Nickel-base Superalloys
- The Effect of Grain Boundary Character Distribution on the Repair Weldability of Waspaloy
- Aluminum Alloys
- A method for studying weld fusion boundary microstructure evolution in aluminum alloys
- Simulation of Weld Fusion Boundary Microstructures in Aluminum Alloys
- Weldability of dissimilar 5000- and 6000-series aluminum alloy combinations
- Friction Stir Welding of Aluminum Alloys
- Stainless Steels
- Recent Developments in the Understanding of Stainless Steel Welding Metallurgy
- A new ferritic-martensitic stainless steel constitution diagrams
- The Relationship between Chromium Nitride and Secondary Austenite Precipitation in Duplex Stainless Steels
- Secondary austenite and chromium nitride precipitation simulated heat-affected zones of duplex stainless steels
- Effect of GTAW Flux on the Microstructure and Properties of Austenitic, Super Austenitic and Super Duplex Stainless Steel Welds
- Phase Transformations during Welding and Post Weld Heat Treatment of Supermartensitic Stainless Steel
- Dissimilar Welding
- Investigation of boundaries and structures in dissimilar metal welds
- Nature and evolution of the fusion boundary in ferritic-austenitic dissimilar metal welds, Part 1-Nucleation and growth
- Nature and evolution of the fusion boundary in ferritic-austenitic dissimilar metal welds, Part 2 - On-cooling transformations
- Ductility Dip Cracking
- Ductility-Dip Cracking Susceptibility in Nickel-base Weld Metals using the Strain-to-Fracture Test
- Development of the Strain-to-Fracture Test for Evaluating Ductility-Dip Cracking in Austenitic Stainless Steels and Ni-base Alloys
- An investigation of ductility-dip cracking in Ni-base filler metals-Part 1
- An investigation of ductility-dip cracking in Ni-base filler metals-Part 2
- An investigation of ductility-dip cracking in Ni-base filler metals-Part 3
- Development of the strain-to-fracture test for evaluating ductility-dip cracking in austenitic alloys
- High temperature cracking in nickel-base weld metal, Part 1- Ductility and Fracture Behavior
- High temperature cracking in nickel-base weld metal, Part 2- Insight into the mechanism
- New Insight into the Mechanism of Ductility Dip Cracking in Ni-base Weld Metals
- Weldability Testing
- Recent Developments in Weldability Testing (Keynote)
- Development of a Gleeble-based Test for Postweld Heat Treatment Cracking Susceptibility
- Methodology for In-situ Investigation of Phase Transformations in Welded Joints
- Evaluation of the Influence of Hydrogen on the Cold Cracking Formation in Welded Joints
- Applicability of Index for the Microstructural Inhomogeneity of Structural Steels/a>
- Phase Transformation Analysis
- Projects
- Investigation of the Mechanism of Ductility-Dip Cracking
- Fabrication and Repair of Austenitic Materials
- An Investigation of Hot Cracking in Hastelloy Alloy C-22
- Friction Stir Welding of Steel
- Development of a Cast Pin Tear Test for Ni-base Superalloys
- Cr-free Consumables for Welding Stainless Steels
- In-situ Investigations of Phase Transformations during Welding
- Fundamental Study of Reheat Cracking
- Effect of Penetration-enhancing Flux on the Microstructure and Properties of Duplex Stainless Steel Welds
- Analysis of Welding Fume
- Equipment
